Anti-breakage High Airtight Pneumatic Conveying Dust Collector Rotary Valve
Product Introduction
Features:
★ Anti-cutting material entrance design, even if the upstream is full of materials, it can be started safely.
★ Offset inlet and outlet design reduces material crushing and damage.
★ External bearing installation, durable and excellent performance.
★ Provide multiple installation methods of chain drive and direct drive.
★ Configure reducer motors according to requirements.
★ The main materials are: cast iron, stainless steel series, etc.
Dimension Display
| Type | External dimension | Inlet | Outlet | Install size | Shaft |
| | A | B | H | E | F | D1 | D2 | e | f | h | g | m | D | d | k |
| TGFY-5L | 410 | 300 | 435 | 250 | 170 | Φ222 | Φ152 | 180 | 150 | 160 | 220 | 130 | Φ200 | Φ35 | 50 |
| TGFY-7L | 420 | 310 | 435 | 260 | 180 | Φ250 | Φ162 | 182 | 160 | 160 | 230 | 140 | Φ220 | Φ35 | 50 |
| TFGY-9L | 470 | 310 | 435 | 260 | 230 | Φ270 | Φ192 | 182 | 210 | 160 | 230 | 190 | Φ240 | Φ40 | 50 |
| TGFY-12L | 520 | 370 | 530 | 320 | 238 | Φ288 | Φ208 | 240 | 218 | 190 | 290 | 200 | Φ260 | Φ40 | 50 |
| TGFY-16L | 570 | 370 | 530 | 320 | 280 | Φ330 | Φ250 | 240 | 260 | 190 | 290 | 240 | Φ300 | Φ40 | |
The outlet and inlet of the dust collector rotary valve housing are generally arranged tangentially, and have a plow-shaped suction edge to prevent shearing and clamping of the product. It can work normally even if it is discharged from a full silo. The conveying capacity of the dust collector rotary valve is roughly proportional to the speed of the rotor. The circumferential speed of the outer end of the rotor blade must be within a certain range.
Application: to be used under cyclone, dust collector, in vaccum system.
Company Profile
There are 63 years of producing and design , any kind of OEM and customization are acceptable!
We can design and build flour mill ,rice mill and all pneumatic hanlding system !
Provide solutions to all pneumatic handling system !
We help you choose the proper model!
How to specify your need? Welcome special customizations.
1. What's your handling material?
2. What's the required throughput? (tons/H or m3/H)
3. What's the air pressure upon and below the rotary valve?
4. What’s the material of rotary valve you want?
Any questions, please do contact me!
Explosive Drawing
Application
